Lorixen.
EN

Digital vehicle inspections: photos, approvals and trust

Short answer: A digital vehicle inspection (DVI) replaces the paper checklist and the awkward phone call with a report the customer can see: photos or short videos of each item, a green, yellow or red rating, and a plain note from the technician. Sent by text, it lets the customer approve work line by line, and anything they decline becomes a follow-up rather than a lost job. The shop's website and booking should connect to it, so the trust built in one visit carries into the next.

"Your front pads are at three millimeters and the rear rotor is scored" means little to most drivers over the phone. A photo of the worn pad next to a new one, with a red flag and a two-sentence note, means a lot more. That's the core idea of a DVI, and the reason most shop management platforms now include one. Here's how it fits each stage of the customer's visit.

Stage 1: Booking and drop-off

The inspection starts before the car arrives.

  • Online booking on your website captures the concern in the customer's words ("squeal when braking, worse in the morning"), plus mileage and the best number for texts.
  • Consent to text. Ask at booking whether the customer is happy to receive the inspection and approvals by text message. Check the rules where you operate for business texting, and keep a record of the opt-in.
  • Check-in inspection. Shopmonkey's inspection documentation describes using inspections as standard check-in and check-out checklists, so the vehicle's condition is documented on entry and exit. Photos of existing scratches or a cracked windshield at drop-off prevent arguments later.

Website feature: a "what happens to your car" page that explains the inspection, shows an example report (with your own photos), and says the customer approves everything before work starts.

Stage 2: The technician's inspection

A good DVI is structured, not a camera roll.

  • Templates. Build inspection templates for common visits: oil service, brake check, pre-purchase, seasonal check. Shopmonkey's help page describes creating inspections from an estimate and saving common ones as templates.
  • Status ratings. Each item gets a color. In Shopmonkey's version these are Passed (green), Needs Attention (yellow), Failed (red) and N/A (gray).
  • Evidence per item. The same page explains attaching photos, videos, notes and recommendations to each inspection item, and uploading images, video and PDFs.
  • Plain-language notes. "Tire tread is close to the wear bars; safe for now, replace within a few months" works better than codes.

Tips for technicians:

  • Take the photo so a non-mechanic can see the problem: include a reference such as a new part, a ruler or the tread gauge.
  • Keep videos short, steady and pointed at one issue.
  • Photograph good items too. A report showing green items builds credibility when red ones appear.

Stage 3: Sending the report

The service advisor reviews the inspection, builds the estimate, and sends a link by text or email. Tekmetric's DVI feature page describes sharing visual inspection reports with customers and using pictures and videos to show what needs to be done.

What the customer should see on their phone:

  1. A short summary at the top: "2 items need attention now, 1 can wait."
  2. Red items first, each with photo, note and the estimate line.
  3. Yellow items next, marked as "can wait" with a suggested timeframe.
  4. Green items collapsed, but available.
  5. Clear buttons to approve or decline each recommended job.

Stage 4: Approval, line by line

Line-item approval is where DVIs change the conversation. Instead of a yes-or-no on a long estimate, the customer approves the urgent brake job and declines the cabin filter for now.

Shopmonkey's help page notes that items marked Needs Attention or Failed can be set as Estimate Requested or Deferred by Customer, using an option you may need to enable in the shop's customer authorization settings. Whatever tool you use:

  • Record who approved what, and when. A digital record of approval protects both sides.
  • Call when it matters. If a customer declines a safety-critical item, a short phone call is still worth making.
  • Don't start work without approval. The system should make it obvious which lines are approved.

Stage 5: Work, updates and pick-up

  • Status texts at key moments: work started, parts arrived, ready for pick-up.
  • Check-out photos of the finished work where useful, such as new tires or a repaired panel.
  • Payment links by text if your platform offers them, so pick-up is quick.

Stage 6: After the visit — deferred work and the next booking

Declined items are not lost sales; they're reminders. Tekmetric's feature page says that if a customer declines part of the estimate, the findings are saved so the service advisor can follow up, and that DVI findings and declined jobs can be used to create repair plans.

Turn that into a routine:

  • Follow-up message at the timeframe suggested in the report, with the original photo attached.
  • Booking link that takes the customer straight to your website's booking page, pre-filled with the deferred job if your system allows.
  • Vehicle history visible to the advisor on the next visit, so the conversation starts with "last time we noticed…".

Connecting the DVI to your website

The inspection lives in your shop management system, but your website still has jobs to do:

  • A page explaining how inspections and approvals work, with an example report.
  • Online booking that feeds the same system, so the concern arrives with the job.
  • Reviews that mention photos and transparency, collected after pick-up.
  • A clear "we never start work without your approval" statement near the booking button.

FAQ

Do customers actually look at inspection photos?

Many do when the report is short and opens straight from a text message. Long, unsorted reports get ignored.

Should the DVI include prices?

The estimate should sit next to each recommended item so the customer can approve with full information. Use your own pricing.

What if a customer declines everything?

Record it, send a polite follow-up at the suggested timeframe, and call for safety-critical items.

Can a DVI work without a shop management system?

Technically, with forms and photo uploads, but approvals and follow-ups are far easier inside a system built for it.

Running an independent shop and want your website, bookings and inspection reports to work as one? Tell us how your shop runs today.

Sources

WhatsAppLet’s talk