Gmail and Yahoo sender rules for a small newsletter
Short answer: Every sender to Gmail needs SPF or DKIM, valid DNS for the sending domain or IP, TLS and a spam rate below 0.3%. Senders who reach roughly 5,000 messages a day to personal Gmail accounts also need SPF and DKIM and DMARC, a From domain aligned with one of them, and one-click unsubscribe for marketing mail. Yahoo publishes a very similar list. Even if your list is small, set up all of it now: it costs little, most email platforms handle the hard parts, and it is the same work you'd have to do later in a hurry.
These are mailbox providers' policies, not laws. They decide whether your newsletter lands in the inbox, the spam folder or nowhere. Google calls its page the email sender guidelines and Yahoo publishes its sender best practices with requirements for all senders and for bulk senders.
Am I a "bulk sender"?
Google's sender FAQ defines a bulk sender as anyone who sends close to 5,000 messages or more to personal Gmail accounts within 24 hours. Two details catch small businesses out:
- It counts the whole primary domain. Mail from yourbrand.com and news.yourbrand.com adds up.
- It's permanent. Google says senders who meet the threshold even once are permanently considered bulk senders, and that status doesn't expire.
A seasonal shop with 3,000 subscribers might never be a bulk sender. Add order confirmations, a holiday campaign and a list that grows, and one busy day can change that. Since the extra requirements are mostly settings, the sensible path is to meet the bulk rules from the start.
Google also notes that its guidelines don't apply to messages sent to Google Workspace (business) accounts; they cover personal Gmail.
The checklist: requirement → how to check → how to fix
| Requirement | Who it applies to | How to check | How to fix |
|---|---|---|---|
| SPF or DKIM authentication | All senders (Gmail and Yahoo) | Send a test to a personal Gmail or Yahoo address and look at the authentication results in the message's raw headers | Add the SPF and DKIM DNS records your email platform gives you, at your domain host |
| SPF and DKIM | Bulk senders | Same as above: both should pass | Add whichever is missing; many platforms ask you to verify a sending domain, which sets up DKIM |
DMARC record (policy can be p=none) |
Bulk senders | Look up the _dmarc TXT record for your domain |
Publish a DMARC record; Yahoo strongly recommends a rua address so you receive reports |
| From domain aligned with SPF or DKIM | Bulk senders | DMARC result in the headers shows "pass" | Send from your own domain, not a free webmail address, and authenticate that domain with your platform |
| Forward and reverse DNS for the sending domain or IP | All senders | Usually your email platform's responsibility on shared IPs | If you run your own mail server, ask your host to set the PTR record |
| TLS connection | All senders (Gmail) | Your platform's documentation | Mainly a concern for self-hosted mail servers |
| One-click unsubscribe header | Bulk senders' marketing and subscribed mail | Raw headers contain List-Unsubscribe and List-Unsubscribe-Post: List-Unsubscribe=One-Click |
Turn on your platform's list-unsubscribe option, or add both headers if you send through your own code |
| Visible unsubscribe link in the body | Bulk senders | Look at the footer of a real campaign | Keep the platform's footer; a link to a preference page is fine for Yahoo |
| Unsubscribes honored quickly | Bulk senders | Unsubscribe from a test address and time how long it takes | Yahoo says within 2 days; Google's FAQ lists not honoring them within 48 hours as a compliance issue |
| Spam rate below 0.3% | All senders | Postmaster Tools spam rate dashboard | Clean the list, send what people signed up for, make unsubscribing easy |
| Don't impersonate Gmail in From | All senders | Your From address isn't an @gmail.com address sent through a platform | Use your own domain |
One-click unsubscribe, explained
"One-click" doesn't mean the link in your footer. It means two headers that let Gmail or Yahoo show their own unsubscribe button and process it without the reader landing on your website.
According to RFC 8058, the sender adds one List-Unsubscribe header containing an HTTPS address and one List-Unsubscribe-Post header containing List-Unsubscribe=One-Click. The mailbox provider then sends a POST request to that address. The RFC also says the message must carry a valid DKIM signature covering both headers, and that the address must identify the recipient and the list, because no extra information is sent.
Google's guidelines show the same two headers. Yahoo says the POST method from RFC 8058 is highly recommended and a mailto version is acceptable.
If you use a newsletter platform, check its help pages for how it handles list-unsubscribe, then confirm by inspecting the headers of a test campaign. If your website sends marketing emails directly (a custom shop, a booking system sending promotions), that code needs to add them and handle the POST.
Checking with Postmaster Tools
Google's Postmaster Tools is free and shows how Gmail sees your domain. According to Google's dashboard guide, it includes:
- Compliance status: whether you meet the sender requirements. Google says changes can take up to seven days to show, and the status reflects your DNS settings as observed when emails arrived, not your current setup.
- Spam rate: the share of your messages that Gmail users manually mark as spam.
- Domain and IP reputation, authentication and feedback loop dashboards.
Small senders will often see "No data found". Google explains that there must be enough emails to evaluate compliance. That's normal for a small list; keep the setup right and check again after bigger sends.
Google's guidelines ask senders to keep the spam rate below 0.10% and avoid ever reaching 0.30%.
What this means for a small list
- Authenticate your domain once, properly, in your email platform. It is the single biggest fix.
- Send from your own domain, never from a free mailbox through a marketing tool.
- Don't buy or borrow lists. People who never signed up press "spam", and spam rate is measured.
- Keep the welcome email honest about what you'll send and how often.
- Separate order emails from marketing if your platform allows it, so a bad campaign doesn't drag down receipts.
FAQ
My list is 400 people. Do any of these rules apply to me?
Yes. The all-sender rules (SPF or DKIM, valid DNS, a spam rate below 0.3%) apply to everyone sending to Gmail, and Yahoo has a similar baseline. The bulk rules may never apply, but meeting them costs little.
Will DMARC with p=none block my email?
No. Google's guidelines say a bulk sender's DMARC enforcement policy can be set to none, and Yahoo asks for at least p=none. It is the monitoring setting: with a rua address you receive reports and can fix problems before ever moving to a stricter policy.
Does Google look at my open rates?
Google's guidelines say it doesn't track open rates and can't verify open rates reported by third parties.
What happens if I don't comply?
Google's FAQ says senders who don't meet the requirements can see temporary and permanent rejections, and rejected messages come back with an error code naming the requirement.
When your shop or booking system sends its own marketing emails and nobody is sure which headers go out, we can audit that sending path end to end.