EV charger installers: a quote form that gets the right photos
Short answer: The best EV charger enquiry forms ask for the handful of photos an installer would otherwise drive out to see: the main fuse, the meter, the consumer unit with its labels readable, the gas and water bonding, and the parking space. Add the property type, where the car parks, the preferred charger location and a short cable-route video, and many jobs can be priced remotely. Then follow up with a clear choice between a remote quote and a site survey.
Every installer knows the wasted trip: a "simple" install that turns out to need a new consumer unit, a long cable run through three rooms, or a supply nobody mentioned. A good enquiry form doesn't replace your judgement; it gives you the evidence to decide which jobs need a visit. Charger manufacturers that run their own installation services already ask customers for most of this. Ohme's walkthrough of its online home survey, for example, splits the survey into Your Home, Your Energy and Your Installation, and asks for specific photos at each step. The blueprint below uses the same logic for an independent installer's website.
Check the rules and any scheme requirements where you operate before deciding what your form must collect; this blueprint covers the practical side only.
The form, section by section
Section 1: About the property
| Field | Why it matters |
|---|---|
| Postcode | Confirms you cover the area and helps plan routes |
| Property type (detached, semi, terrace, flat, other) | Flats and terraces raise cable-route and permission questions early |
| Own or rent | Renters may need landlord permission; Ohme's survey asks the same |
| Listed building or similar restrictions? (Yes / No / Not sure) | Can affect where a charger may go; flag for follow-up |
| Where the car parks (garage, driveway, street, shared parking) | Street and shared parking usually need a different conversation |
Photo: parking space. Ask for a wide shot showing the house in relation to the parking spot. Ohme's guide asks for exactly this, and for the dropped kerb to be visible if the driver crosses a public footpath.
Section 2: The electrics
This is the part that decides most quotes. Give each photo request its own upload field with a small example image.
| Photo | What to tell the customer | Why it matters |
|---|---|---|
| Main fuse (incoming supply) | Usually next to the meter; include the rating label if there is one | Supply capacity |
| Electric meter | Whole meter in shot, plus any isolation switch beside it | Meter type and position |
| Consumer unit (fuse board) | Open the lid; make sure switch labels are readable | Spare ways, protection, whether it needs changing |
| Gas bonding, if the home has gas | The green/yellow earth wire on the pipe near the gas meter | Bonding work needed |
| Water bonding | The green/yellow wire on the main water pipe, near the stopcock | Bonding work needed |
These mirror the photos Ohme's survey requests, which is a useful sign that they're the ones that matter. Ohme also asks whether water pipes are plastic or metal; add that as a simple choice with "I don't know".
Where is the supply? A choice list helps: external meter box, inside at the front, inside at the back, middle of the house, basement or loft, "I don't know".
Section 3: Charger and cable route
| Field | Why it matters |
|---|---|
| Preferred charger location (photo of the wall) | Mounting surface, height, distance to parking |
| Approximate distance from consumer unit to charger | First estimate of cable length |
| Cable-route video, under a minute | Shows walls, rooms and obstacles between meter and charger |
| Charger choice (have one / want your recommendation / undecided) | Supply-only vs supply-and-fit, and stock planning |
| Tethered or untethered preference | Affects product choice |
| Solar panels or battery at the property? | Some chargers and set-ups differ when solar is present |
Ohme's guide suggests the cable-route video starts at the meter and walks the shortest route to the charger location, steady and at walking pace, under a minute, and it asks for a simple floor plan sketch showing the meter, consumer unit and charger location with the route drawn between. A sketch upload is a good optional field for awkward properties.
Section 4: Contact and timing
- Name, email, mobile
- Preferred contact method
- When they'd like the install (as soon as possible, within a month, just researching)
- Best days for a survey or install
- Consent to contact and how their data is used
Making the form usable on a phone
Most customers will fill this in standing at their meter cupboard with a phone, so:
- One photo per field, with a thumbnail example. Jotform's file upload settings, for example, let you limit file types, sizes and the number of files per field.
- Conditional questions. Show gas bonding only if they say the home has gas; show flat-specific questions only for flats. Jotform's conditional logic offers Show/Hide Field conditions for exactly this.
- Save and continue later, if your form tool supports it. Ohme says its own survey takes around 20 minutes on average, so people may need a break to find the meter.
- "I can't find this" options rather than forcing a photo. A missing photo is information too.
The follow-up flow
- Instant confirmation listing what they sent and what happens next.
- Triage within a set time, for example one working day. Sort each enquiry into:
- Remote quote: photos clear, standard install.
- Retake needed: one or two photos unclear; ask specifically ("the consumer unit labels aren't readable, could you retake with the lid open?").
- Site survey: unusual supply, long or complex route, flats, shared parking.
- Quote with what's included and any assumptions, based on your own pricing.
- Booking link for the install or survey once accepted.
- Reminders before the visit, including "please make sure we can reach the consumer unit and meter".
- After install: handover notes, app set-up help for the charger, and a review request.
Ohme's guide also offers customers an in-home survey if they can't complete the online one. Offering the same choice on your form keeps less confident customers from dropping out.
FAQ
Do customers actually send good photos?
More often when each photo has its own field, an example image and a one-line instruction. Vague "upload photos" boxes get vague results.
Can every job be quoted remotely?
No. Use the form to separate standard installs from jobs that need a visit, and say so on the form.
How quickly should we reply to an enquiry?
Set a target you can keep, such as one working day, and say it in the confirmation message so customers aren't left wondering.
Is a video really necessary?
It's optional but very helpful for the cable route; keep the request short and say under a minute.
An enquiry form can sort remote quotes from survey jobs before you pick up the phone; walk us through how you quote installs now.