GA4 Showing No Data After Setup: A 15-Minute Check
Short answer: Work through the causes in a fixed order. Confirm the tag actually loads on your live pages, confirm the measurement ID starting with G- matches the property you are looking at, check whether a consent banner blocks analytics until visitors accept, look for an internal traffic filter switched to Active that is removing everyone, and confirm the data stream URL. Then test with your own visit in Realtime while an ad blocker is off. If Realtime shows you but standard reports are blank, simply wait, because normal reports can take a day or two to fill.
Before you start
Have two browser tabs ready: your live website, and GA4 open on the property you expect to receive data. Turn off any ad blocker or privacy extension for this test, or use a clean browser profile, because those tools commonly block Google Analytics and will make a working setup look broken.
Check 1: Is the tag on the page at all? (3 minutes)
Open your homepage, right-click and choose View page source. Search for gtag/js?id=G- or googletagmanager.com/gtm.js.
- Found
gtag/js: GA4 is installed directly. Note the G- ID. - Found
gtm.js: Google Tag Manager is installed. The GA4 tag lives inside your Tag Manager container, and it only works if that container version has been published. - Found nothing: the snippet never made it onto the live site. Common reasons are a caching plugin serving old pages, the code being added to a staging copy, or a theme setting that was saved but not applied.
Also check a second page, such as a blog post or product page. Some themes only include header scripts on certain templates.
For Tag Manager, open the workspace and check the Versions tab. Many people build the tag and preview it, but never press Submit to publish.
Check 2: Is it the right measurement ID? (2 minutes)
In GA4, open Admin, then Data collection and modification, then Data streams. Click your web stream and copy the measurement ID.
Compare it character by character with the ID on your site. Mix-ups are common when:
- An old Universal Analytics ID starting with UA- is still in place. Those properties no longer process data.
- Someone created two GA4 properties during setup and installed the ID from the other one.
- A plugin field holds the stream ID (a long number) instead of the measurement ID.
Google's GA4 developer setup guide shows where the ID belongs in the snippet if you are checking code by hand.
Check 3: Is consent blocking analytics? (3 minutes)
If your site has a cookie banner, analytics may be set to wait for consent. With Google's consent mode, the setting analytics_storage: 'denied' as the default means GA4 does not set cookies until the visitor accepts. Depending on your configuration, it may send limited cookieless pings or nothing at all.
Test it:
- Open your site in a private window.
- Accept all cookies on the banner.
- Browse two or three pages.
- Watch GA4 Realtime.
If you appear only after accepting, consent is working as designed, and your data volume will depend on how many visitors accept. If you never appear even after accepting, the banner may not be passing the update to Google correctly. The consent mode documentation explains how the default and update commands should be ordered.
Check 4: Is a filter removing everything? (2 minutes)
Open Admin, then Data collection and modification, then Data filters. GA4 often creates an "Internal traffic" filter in Testing state. Problems start when:
- The filter was switched to Active.
- The internal traffic rule was defined too broadly, for example an IP range that covers a whole mobile network, or a rule set up in a way that matches every visitor.
Set the filter back to Testing while you diagnose. If data appears, tighten the rule before activating it again. Also check for a developer traffic filter that excludes debug hits, which can hide your own test visits from reports.
Check 5: Is the data stream pointing at the right site? (1 minute)
The web stream lists a website URL. It does not have to be perfect for data to arrive, but a stream created for an old domain or a staging address is a sign the whole property belongs to a different setup. If you moved domains, confirm the tag on the new site uses this stream's measurement ID.
Also check whether the property is in the right reporting time zone and currency. They will not stop data, but a wrong time zone can make today look empty when traffic is being logged under tomorrow.
Check 6: Watch yourself arrive (3 minutes)
With blockers off and consent accepted:
- Open GA4 Reports, then Realtime.
- Visit your site from your phone on mobile data, as well as from your computer.
- Within a minute or so you should appear in the "Users in last 30 minutes" card.
For more detail, use Admin, then DebugView, with the Tag Assistant extension connected. You will see each event arrive in order, which helps if page views appear but other events do not.
If you still see nothing, open the browser developer tools, go to the Network tab, filter for collect, and reload. Requests to a URL containing /g/collect mean the browser is sending data. No requests point back to checks 1 to 3. Requests that return errors suggest a blocked domain or a Content Security Policy that needs updating.
Check 7: Is it just processing delay? (1 minute)
Realtime and DebugView show data quickly, but standard reports like Acquisition and Engagement are processed later and commonly take 24 to 48 hours to fill for a new property. If Realtime shows users and everything above checks out, the right fix is patience. Come back the day after tomorrow before changing anything else.
FAQ
Why does Realtime show users but reports are empty?
Standard reports are processed with a delay. For a newly created property, wait one to two days before assuming a problem.
Can ad blockers stop GA4 completely?
Yes, for visitors who use them. Your totals will always be lower than server logs for that reason, but they should not be zero.
We have two tags installed. Is that a problem?
It can double count page views. Use either a direct gtag snippet or Tag Manager, not both for the same ID.
Does the old Universal Analytics ID still work?
No. Properties with UA- IDs no longer collect data. You need a GA4 property and its G- measurement ID.
Reports still blank after all seven checks? Ask us to take a look and we will find where the data is getting lost.